Publicidad
Idiomas disponibles
Idiomas disponibles
BR N
MODELS
QP430SS
,, QP436SS
,, QP442SS
(J_ 10=MINUTE DELAY OFF
When your hood fan is on (any speed) press the (,_
button to
N
activate the delay off feature. When activated, the hood fan will
automatically turn off after 10-minutes has elapsed. The delay
feature is active when the following appear on the LED screen: A
green indicator illuminated above the delay (._ button, a numeric
countdown
"10-0" and a clockwise
rotating LED. The delay
button can be pressed once again, to stop the delay countdown.
Pressing the (._ button again will resume the delay countdown.
Pressing and holding the button will turn off the feature.
(_
TIMER
Press the Q
button to activate the timer setting feature. Use
the o_and oe+ebuttons to reduce or advance the timer setting to
the desired duration. When the desired timer setting is reached,
allow 3 seconds without pressing any additional button or press
the _
button once again. The timer will then activate, and
the countdown will be displayed on the LED screen along with
an green indicator above the Q
button. After the timer has
reached "0:00'; an audible beep will be heard. The beep will
continue until the timer button (_})
is pressed once again. The
timer countdown can be stopped at any time by pressing the
_)
once again. Pressing the _._
button again will resume
the timer countdown. Pressing and holding the _})
button will
turn off the feature. Note that when both the timer and delay off
features are active together, the timer function will be illuminated
on the LED display, and the delay off countdown will be active,
but not displayed.
Page 3
CLOCK SETTING
Press the (,_
button once, the "hours" will begin blinking in the
LED screen. Use the 2 and ore buttons to set the appropriate
hours for the clock. A small indicator will illuminate in the left
corner of the LED screen to designate "pm'_After the hours are
set, press the (,_
button to advance the menu to the minute
selection.The
minutes will begin blinking in the LED screen. Use
the _oand o+e buttons to set the minutes. Press the (_
button
again to advance the menu to select "display" settings.
DISPLAY (default from factory - display ON)
The LED screen will display the display feature -d-. Use the 2 or
e_e button to toggle the LED screen on (d on) or off (doFF). When
the display off (doFF) feature is selected, the LED display clock
illumination is disabled. Press the _
button again to advance
the menu to select the "Sleep" setting.
SLEEP MODE (default from factory - OFF)
The LED screen will display the "Sleep" feature -S-. Use the _o
or e+e button to toggle the Sleep feature on (S on) or off (S off).
When the Sleep on (S on) feature is selected, the LED screen
and fan/light
LED indicators
are disabled. The ambient
light
sensor, delay-off and timer features will also be disabled. All
controls for the fan and light operation,
including Heat Sentry,
are still active. Press the _
button again to advance the feature
menu to select the 'Ambient Light Sensor" setting. Note: To
access the feature menu when the Sleep Mode is active, press
and hold the (,_ button for 2 seconds.
FEATURE MENU
Your hood offers many settings
that can be accessed
and
adjusted by scrolling through the feature menu. Your hood fan
must be off to be able to activate and access the feature menu.
Pressing the _
button when the hood fan is off will activate the
feature menu. Pressing the _
button again when the feature
menu is active will scroll through the various features that can
be adjusted/set. When the feature menu is active, if a button is
not pressed within 10 seconds or after scrolling through all menu
settings, the feature menu will automatically be exited, and all
selected settings will be saved. A green indicator above the
icon will illuminate when the feature menu is active.The following
features can be adjusted sequentially:
AMBIENT LIGHT SENSOR (default from factory-
Level 1 ON)
There are two level settings for the ambient light sensor. When
either of the two settings is active, the light sensor will detect a low
level of light in your kitchen, and will automatically turn the task
lights on the hood to the night time setting. The other light settings
are still functional. If selected when the ambient light sensor is
active, they will temporarily overide the ambient light sensor until
they are turned off. The level 1(Aonl) ambient light sensor setting
will require your kitchen to be more dark than the level 2 (Aon2)
setting before activating the night time setting. The LED screen
will display the ambient light sensor function -A-. Use the _o or e+ e e
button to select the light sensor setting Aonl, Aon2, or AoFE The
Off (AoFF) setting deactivates the automatic ambient light sensor
feature so the night time light operation is manual.
Note that the feature menu can be exited any time by not
pressing any button(s) for 10 seconds or by scrolling through the
entire feature menu.
Publicidad
