Regalo HideAway 4010HDCA Instrucciones De Montaje página 11

NOTE: When using this bed rail on a foam mattress, with little or no internal
structure, make sure the straps are not over tightened. If the straps are too
tight the mattress will likely fold or buckle in the middle. This will limit the bed
rail's ability to provide your child with the highest level of safety.
Make slight adjustments to find the best level of tightness on your mattress.
The bed rail must be tight, but should not cause the mattress to buckle or fold.
If the straps do not pull through smoothly it may be twisted under the mattress.
Straighten the straps before continuing with the installation.
STEP 4
Once the straps are in place
and tightened, close the locking
buckle by giving one final tug
while holding the straps in place.
NOTE: When everything is locked and in place, check to make sure the mesh
wall of the bed rail is firmly up against the side of the mattress. There should
be NO GAPS. Check for twisted straps and retighten the straps as needed.
The excess straps can be tucked under the mattress when the installation
is complete. Do not cut excess strap, may cause strap to fray.
English 11