marklin V320 Manual De Instrucciones página 13

CV Discription
Multiple station announcements
Bit 0 – 3 = Number of stations
60 PoM Bit 4 = Last station reverses the sequence.
Bit 5 = Locomotive direction determines the sequence.
Bit 6 = Basic setting for sequence.
61 PoM Random sound: Interval min.
62 PoM Random sound: Interval max.
63 PoM Volume
66 PoM Reverse trim
95 PoM Forward trim
( ) Values = factory settings
DCC:
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
Betrieb • Operation • Fonctionnement
programming on the programming track by means of CV programming,
6021 Value
—
—
—
01 - 63 (63)
—
—
13
DCC Value
0 – 126 (38)
0 – 255 (30)
0 – 255 (50)
0 – 255 (255)
0 – 255 (128)
0 – 255 (128)
Exploitatie • Operación • Operazione