Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
Regional Requirements
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
www.P65Warnings.ca.gov
UK DECLARATION OF INCORPORATION
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
The Supply of Machinery (Safety) Regulations 2008 S.I.
2008/1597:
S.I. 2008/1597 (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
And that this partly completed machinery is in conformity
with the provisions of the following other UK Regulation(s):
S.I. 2016/1107
This partly completed machinery must not be put into service
until the final machinery into which it is to be incorporated
has been declared in conformity with provisions of The Sup-
ply of Machinery (Safety) Regulations 2008 S.I. 2008/1597,
where appropriate.
The following (parts/clauses of) Designated Standards have
been applied:
BS EN 1127-1:2019, BS EN ISO 12100:2010, BS EN ISO
80079-36:2016, BS EN ISO 80079-37:2016
The relevant technical documentation was compiled and was
communicated in accordance with The Supply of Machinery
(Safety) Regulations 2008 S.I. 2008/1597 part B of Annex
VII and Equipment and Protective Systems Intended for Use
in Potentially Explosive Atmospheres Regulations 2016 S.I.
2016/1107 Article 13 (1) b) ii in the ExVeritas UKCA Ap-
proval Body Number 2585.
Authorities can request the technical file for Equipment and
Protective Systems Intended for Use in Potentially Explosive
Atmospheres Regulations 2016 S.I. 2016/1107 in paper form
from:
https://www.exveritas.com/2022/02/02/what-you-need-for-
atex-and-ukca-explosive-atmosphere-certification-for-the-uk-
and-eu-markets/
Stockholm, 1 September 2023
Håkan Andersson, Managing Director
Signature of issuer
Authorised Representative UK
James McAllister, General Manager
Atlas Copco Ltd
Swallowdale Lane
4
© Atlas Copco Industrial Technique AB - 9834 3996 00
Hemel Hempstead
Hertfordshire HP2 7EA
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this prod-
uct.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious in-
jury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.
Intended Use
This motor is designed to be incorporated into a fixed or mov-
ing machine. It is either for right hand rotation only, left hand
rotation only, or reversible rotation and should be mounted by
the flange or threaded nose only, as appropriate. No other use
permitted.
The risk of motors being the source of ignition of a poten-
tially explosive atmosphere is extremely small. The user is re-
sponsible for assessing the risks associated with the whole
machine into which the motor is to be incorporated.
LZB54-LB-AR0009-11
Publicidad
