Publicidad
Idiomas disponibles
Idiomas disponibles
[o] d =1 -'_,._n ul [ o]_ ,,m,,,m
Craftsman routers are designed for speed,
accuracy and convenience in performing
cabinet work, routing, fluting, beading,
cove-cutting, dovetails, etc. They will
enable you to accomplish inlay work,
decorative edges and many types of
special carving.
DEPTH
ADJUSTMENT
Fine Adjustment
Knob
The pop up fine depth adjustment knob
allows precise bit height adjustments on
your router.
To use the fine adjustment feature, release
the base clamp lever, pull up the fine
adjustmentknob and turn the knob
clockwiseto lower, or counterclockwise
to raise the bit (Figures 4 and 5).
Note that one fullturn of the knob will raise
or lower the bit approximately 1/16" of an
inch. After making depth adjustments,
re-clamp the motor.
NOTE: All depth adjustments must be
made with the base clamp lever released.
DEEP
CUTS
For deeper cuts, make several
progressively deeper cuts by starting
at one depth and then make several
subsequent passes, increasing the cutting
depth with each pass.
To be certain that your depth settings
are as desired, you may want to make
test cuts in scrap material before
beginning work.
Figure'4
Figure 5
11
Publicidad
