Bose Cinemate 130 Guia Del Usuario página 31

Care and Maintenace
Poor or
distorted
sound
Intermittent
sound
• Remove all protective films from the system.
• Secure all cable connections on the soundbar, TV, and connected sources.
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass C_' module.
- Pair the Acoustimass module with the console (see "If your console
cannot find the Acoustimass _ module").
• If using the analog or _ connector, decrease the volume on your source.
Factory reset the system (see page 32) and run the ADAPTiQ_audio
calibration (see page 20).
• Secure all cable connections on the soundbar, TV, and connected sources.
Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass ® module
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1. Unplug the Acoustimass module.
2. Press on the remote control.
3. Press Y until 15 PAIR AOOUSTIMASS appears on the display.
4. Press @.
Plug in Acoustimass appears on the display.
5. Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
English - 31