GE GFWS1705 Manual Del Propietario E Instalación página 6

Control settings.
Add q:)
Steam
Add Steam (on some models)
Add Steam adds steam into the washer
to assist with loosening stains on the
Whites, Colors/Normal, Towels/Sheets,
Active Wear or Power Clean (depending
on model), Bulky Bedding or Sanitize
cycles.
To use:
1. Turn power ON and select a wash
cycle.
2. Select the Add Steam button to
activate steam.
3. Press the Start/Pause button.
Soil
(appearancewill vary)
Soil
Change the Soil level to increase or
decrease the wash time to remove
different amounts of soil.
To change the Soil level, press the Soil level
button until you have reached the desired
setting. You can choose between Extra
Light, Light, Normal, Heavy or Extra Heavy
soil levels.
l Temp
(appearancewill vary)
Tamp
Adjust to select the proper main water
temperature for the wash cycle. The
PreSoak and PreWash rinse water is
always cold to help reduce energy usage
and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label
when selecting the wash temperature.
To change the wash temperature, press
the wash Tamp button until you have
reached the desired setting. You can
choose between Tap Cold,Cold, Warm,
Hot or Extra Hot (Extra Hot is available
on models equipped with a heater). By
design, to protect fabrics, not all wash
temperatures are available for certain
wash cycles.
NOTE:The first !0 seconds of the wash
fill is always cold. This feature assists in
conditioning the fabric and preventing
stains from setting on garments.
[ Spin
(appearancewill vary)
Spin
Changing the Spin speed changes the final
spin speed of the cycles.Always follow the
garment manufacturer's care label when
changing the Spin speed.
To change the Spin speed, press the Spin
speed button until you have reached the
desired setting. You can choose between
No Spin,Low, Medium, High or Max. Higher
spin speeds are not available on certain
cycles,such as Delicates.
Higher spin speeds remove more water
from the clothes and will help reduce dry
time, but may also increase the possibility
of setting wrinkles on some fabrics.
My
Cycle
My Cycle (on some models)
To savea favorite cycle,set the desired
settingsfor wash cycle,soil level,spinspeed
and wash temp settings and hold down the
My Cyclebutton for 3 seconds. A beep will
soundto indicatethe cyclehas been saved.
To useyour custom cycle, press the
MYCyclebutton before washing a load.
To change the saved cycle, set the desired
settings and hold down the
My Cyclebutton for 3 seconds.
NOTE: When using My Cycle, wash
options cannot be modified after the
cycle has been started.
NOTE: If you change wash options with
MYCyclebefore starting the cycle, the
My Cyclelight will turn off and you will
be returned to the base cycle.