Mokwheel Basalt ST Manual Del Usuario página 16

Step 4: FRONT WHEEL INSTALLATION
Remove the fork protector shaft(this is to
keep the fork straight while in transport).
The protective shaft can be discarded.
Use a bike pump inflate tires. The recom-
mended pressure for this model is 20 PSI
(1.379 Bar).
Do not over-inflate or under-inflate tires.
Install the wheel onto the front fork.
012
Tighten the nuts on both sides to complete
the installation.
When tightening the nuts, do one rotation
each side to make sure the wheel is
centered.