Parts And Components; Before Use - cecotec ROCK'NTOAST CLASSIC + Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
6. Hinged handle
7. Bottom plate
8. Top plate
9. Overheating indicator
10. High temperature indicator
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.

2. BEFORE USE

- This device is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Before the first use, wipe the plates with a damp cloth, a dry cloth with paper, then brush
the plates with a little butter, margarine or cooking fat.
Box content
- Rock'nToast Grill + Sandwich Maker
- Instruction manual
3. OPERATION
Plug the device to a power supply.
-
Close the sandwich maker and, while it is preheating, prepare the food you wish to cook.
-
Wait 3 minutes: the temperature indicator light will illuminate green, indicating the end of
-
preheating.
Open the sandwich maker and put a slice of bread in the bottom plate.
-
Add the filling and top with another slice of bread. Close the sandwich maker loosely.
-
Steam will escape through the opening between the plates during cooking. Keep hands
away from hot surfaces and steam.
32
ROCK'NTOAST CLASSIC +