GE AEW10 Manual Del Propietario E Instrucciones De Instalación página 9

Installation instructions
Ill WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
17" min.
27" to 39"
(With accordion panels)
I 1
23" min.
(Without accordion panels)
[] STORM WINDOW
REQUIREMENTS
1/2" higher
than frame
Storm
window
frame
A storm window frame will not allow air
conditioner to tilt toward the outside, and
will keep it from draining properly. To adjust
for this, attach a piece of wood to the stool.
WOOD PIECES-
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
_t _Wood
Stool
9
[] REMOVE THE AIR CONDITIONER
FROM THE CASE
[A1 Remove and save the 2 screws from the
lower sides of the front grille.
FRONT
[] Grasp the lower corners of the grille while
pressing in on the case sides with your
finger tips. Pull out to release and lift it up.
NOTE: Do not pull the bottom edge
toward you more than 3" or you may
damage the tabs of the grille.
1 1
FRONT
['C-']Remove the screw from each side of the
case. Keep them in a safe location.
FRONT
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not
pull or lift on the styrofoam discharge area.
Do not
pull or
lift in
this
area--
damage
to the
unit may
result
FRONT