Loss Of Data; Fan Speed; Dimmer Curve; Dimmer Speed - Chauvet Professional MAVERICK MK2 PROFILE Manual De Usuario

Operation

Loss of data

In case of an input signal being lost in any way, the Maverick MK2 Profile will respond in one of two ways.
the product will either hold the last signal received, or black out all LED output.
To set which way the product responds, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Loss of Data, or touch the display where it says Loss of Data.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Hold (hold last signal received) or Close
(black out all LED output), or touch the display where it says the desired option.
5. Press <ENTER>.

Fan speed

To set the speed of the fans, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Fans, or touch the display where it says Fans.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Auto (fan speed set according to product
temperature), Full (maximum speed), or ECO (quiet fans mode), or touch the display where it says
the desired option.
5. Press <ENTER>.

Dimmer curve

To set the dimmer curve, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Curve, or touch the display where it says Dimmer Curve.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Linear, Square, I Squa, or SCurve, or
touch the display where it says the desired option.
5. Press <ENTER>.

Dimmer speed

To set the dimmer speed, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.

Pulse Width Modulation

To set the PWM frequency, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select PWM Option, or touch the display where it says PWM Option.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the PWM frequency, from 600 Hz, 1200 Hz,
2000 Hz, 4000 Hz, 6000 Hz, or 15000 Hz, or touch the display where it says the desired option.
5. Press <ENTER>.

Smart zoom

To set the zoom range to optimal focus, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Smart Zoom, or touch the display where it says Smart Zoom.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Select YES, or touch the display where it says the desired option.
5. Press <ENTER>.
Maverick MK2 Profile User Manual Rev. 3
menu.
menu.
menu.
menu.
menu.
menu.
Page 20 of 209