Publicidad
Idiomas disponibles
Idiomas disponibles
COMFORT RANGE
Herschel Comfort
ENGLISH
Installation Guide
Assembly Kit
Please check the enclosed assembly kit consists of: 1x fixings bracket, 8x screws, 8x rawlplugs
Step 1
Mark 8 mounting points using the supplied bracket as a
template. For ceiling-mounted panels if it is possible, try to
place the centre of the bracket over a ceiling joist for extra
support.
There is a 'dot' in the centre of the bracket that shows where
the centre of the panel will be when installed. Use this to
help align the bracket for mounting.
Step 2
Use an 8mm drill bit to drill holes in to the installation site on
the marked points and then place the rawlplugs in to the
drilled holes.
Step 3
To fix the bracket to the installation site turn the screws in as
far as possible through the holes in the bracket in to the
rawlplugs.
Step 4
Before placing your Herschel far infrared heater panel on to
the bracket please check that the four plastic spacer feet on
the rear of the far infrared heater panel are screwed in as far
as possible.
Step 5
Now slide the far infrared heater panel on to the bracket as
far as it will go and then pull it slightly towards you so the
centre of the mounting studs on the panel lock fully with the
circular recess in the bracket.
Step 6
Unscrew the four spacer feet on the rear of the far infrared
heater panel so that the panel is secured against the wall or
ceiling and cannot be moved.
Step 7
Please check that your Herschel far infrared heater panel
cannot be removed from the wall or ceiling.
Removal
Unscrew the four plastic spacer feet. Push the centre of the panel in towards the wall or ceiling to disengage
the studs from the bracket recess and then slide your panel out of the bracket.
Publicidad
