asalvo baby ECUADOR 20659 Guia Del Usuario página 17

ADJUST THE HARNESS STRAPS
6
Pull the adjustment straps until the
harness straps are fully tightened.
Tighten the shoulder restraint before the
child becomes uncomfortable as much
as possible.
The loose straps are very dangerous for
the child. Therefore, check that the strap
adjuster is tight when placing the child
in the pram and then tighten the straps.
INSTALLATION GROUP 0 WITH SEAT BELT
7
Warning: Read your vehicle owner's manual for information on the basics of
child seats in vehicles.
Warning: Do not place this child seat on seats with front airbags.
Warning: This infant car seat can only be installed with a three-point seat belt.
Warning: The infant car stroller must be installed rearward-facing (fig 1).
Step 1: Adjust the handle to the forward position (fig. 1). Place the stroller on the
car seat. The handle must be firmly resting on the back of the car seat.
Step 2: Slide the lap belt of the vehicle's 3-point seat belt through both lap belt
guides. Let the tongue of the tongue lock into the belt latch with a clearly audible
"click". Pull the shoulder belt in a narrow direction to tighten the lap belt. Check
that the tongue plate is locked by pulling on the belt.
1 2
click
17
EN