di gianfranco conti - 20021 Bollate (MI) ITALY - Viale Lombardia, 18 - Telefono 02 38302386 r.a. - Telefax 02 38302389
2 - TECHNICAL CHARACTERISTICS
Voltage
Frequency
Installed power
Fuse
Machine weight
Dimensions
3 - INSTALLATION
3.1- Setting up
The machine is supplied already assembled and ready for use. It must only be connected to mains.
The packaging includes:
a) instrument body;
b) operating instructions.
Owing to its particular nature, the machine can be handled manually without necessitating further
devices.
3.2- Connection and starting
Once instrument has been placed on a table in front of the operator, perfectly horizontal, thereby
guaranteeing an adequate stability and having assured that general switch is on OFF position (1),
feed cable may be connected, previously plugging in same at the side of machine (2) and subse-
quently plugging it to mains.
4 - OPERATION AND USE
4.1- Operation
The equipment disposes of a general ON/OFF device (1) with which one can turn the light on
which illuminates the reference point both under the contrast base (6) as well as that under
the Polaroids lens (4).
Please remember that, after use, the machine must be turned off.
ENGLISH
Volt
230
Hz
50
W
15
A
0.5
Kg
1.9
mm
150x215x215
Rev. 0/00
Pag. 5 di 9
JOLLY