Kamikaze KVS7000P Manual página 38

•
The charger is designed for use with original batteries, otherwise it may cause risk of fire or
explosions.
•
Do not use damaged chargers to reduce the risk of injury.
•
Do not use the charger on flammable surfaces (eg. paper).
•
The battery is not fully charged on first use, it must be charged for 3/4 hours before first use.
•
The normal charging time is 3/4 hours (charging time for 2 fully discharged batteries), do not
charge the battery for too long to avoid damaging it.
•
The charger has three outputs, it is possible to charge up to 3 batteries at the same time. The
charging time is proportional to the number of batteries connected and to the state of their
charge. Supervise the charging time by the LED indicator (red light in charge, green light end of
charge).
4.5. Attention (Residual risks)
Use the tool carefully in order to avoid the following risks:
•
Cuts and wounds caused by sharp edges.
•
Use for prolonged times or in incorrect positions can cause damage to your body in the long term.
Warning!
The device can produce electromagnetic waves and interfere with electro-medical devices. It is
recommended to consult a doctor before using this tool with electro-medical devices.
Warning!
Do not touch the chain when the battery is on the tool.
Keep passers-by and other people at a minimum distance of 1.5m
Warning!
In particular situations, the chain and the handle could reach high temperatures. It is recommended to
handle the tool with care using protective gloves.
Noise and Vibration Measurements:
Sound pressure level: < 70 dB(A)
4.6. Tool safety requirements
The chainsaw is safe if it meets the following requirements:
1. The chain is not damaged.
2. The chain tension is correct.
3. The bar is not deformed.
4. The bar slot is intact.
5. The chainsaw is clean and dry.
Max vibration during use: < 2.5 m/s
6. The handle is intact.
7. The locking ring nut of the extension is
correctly tightened.
8. Head locking ring nut is correctly tightened.
9. Lubrication works properly.
2