Publicidad
Idiomas disponibles
Idiomas disponibles
tVc,er
Audio/Video
cable
(provided)
Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
® Red to AUDIO R IN
® White to AUDIO L IN
Make sure all units are turned
off.
Connect
the camcorder
to a TV or VCR as
shown
in the illustration.
If using a VCR, go to step
If not, go to step_
Connect
the VCR output to the TV input,
referring
to your VCR's instruction
manual.
Turn on the camcorder,
the VCR
and the
TV.
Set the VCR to its AUX input mode, and
set the TV to its VIDEO
mode.
Start
playback
on the camcorder
(:_ 16).
•
Please set"16:9
OUTPUT" of Playback
Menus so that the image may suit your TV
(16:9 TV or 4:3 TV) (:c. 21,23).
To choose
whether
or not the following
displays
appear
on the connected
TV
•
Date/Time
Set "DATE/TIME"
to "ON" or "OFF" (c-. 21 ).
• Time
Code
Set "TIME CODE"
to "ON" or "OFF" (u
21 ).
•
On Screen
Set "ON SCREEN"
to ';OFF", "LCD" or
"LCD/TV"
(_
21 ).
_otes:
*
It is recommended
to use the AC Adapter as
the power supply instead of the battery pack.
(_:_ 11 )
To monitor the picture and sound from the
camcorder without inserting a tape. set the
camcorder's
Power Switch to "REC", then set
your TV to the appropriate
input mode.
*
Make sure you adjust the TV sound volume to
its minimum level to avoid a sudden burst of
sound when the camcorder
is turned on.
*
Conversion
lens and AV Cable may not be
used at the same time depending
on the type
of conversion
lens you are using.
It is recommended
to use JVC conversion
lens.
Some conversion lens may not be compatible
with this camcorder.
Publicidad
