Costway Columpio Manual Del Usuario página 3

3
Put the 4 metal tubes with foam
into the sleeves one by one.
5
Put the 2 tube into the sleeve,
nd
small socket to the big socket and
connect it.
7
Then connect the body as a round
platform.
04
4
Put the tube like this.
6
Repeat it, and make it like half
folded as shown.
8
Before assembling the screw bolt,
firstly put it through the Velcro
belt.
9
Screw bolt goes through the Velcro
belt cover.
11
Tighten it with screw nut, do not
forget the washer.
13
After the bolt assembling, cover
the Velcro belt, and repeat 3 times
on other 3 bolts.
10
Assemble the screw bolt to the
frame tube.
12
Use wrench to tighten it before
use.
14
The appearance from the top is
shown in the figure.
05