Dometic Oceanair Skyvenetian Instrucciones De Montaje Y De Uso página 40

Operation
Tilting the blind (with loop cord operation)
o
7.2 Operating powered blinds
Observe the following notes:
• Each blind can be stopped in any position.
• When operating the blind with an automation system, operation depends on the
programming of the controls.
• The blind is set up in the factory to automatically stop:
– When the blind is fully deployed
– When the blind is fully stowed
For later adjustments see chapter "Adjusting the blind stop (only for XL with
Atlantic or Pacific motor version)" on page 43.
• The slats will only tilt when blind is fully deployed
40
2.
Skyvenetian Manual/Powered
A
1.
1x
EN