Descargar Imprimir esta página

ABC Design MALLOW 2 FIX I-SIZE Instrucciones De Uso página 29

Publicidad

Idiomas disponibles

Idiomas disponibles

Note
• Do not use the child seat on car seats in which a front airbag
is activated.
• This is a child restraint system of the "i-Size" category. It has
been approved in accordance with regulation no. 9 for use
on car seats which are suitable for i-Size restraint systems
according to the vehicle manufacturer's specification in the
vehicle manual. Please contact the manufacturer of the child
restraint system or the retailer in cases of doubt.
CAUTION:
• The safety of the baby seat is only guaranteed by the manu-
facturer when the seat is used by the initial purchaser. It is
therefore not advisable to buy a second-hand seat.
WARNING:
• The baby seat is only for use in car seats which face the
direction of travel.
• Fold-down car seats must be firmly clicked into place.
• If the baby seat is fitted to the passenger seat then the pass-
enger seat must be pushed back as far as it will go.
• The baby seat may not be used on car seats which are fitted
with an airbag. It might be possible to disable the airbag (ask
your car dealer).
• The backrest of the passenger seat must be fully upright. If
there is a head restraint fitted to the seat, it must be put into
the lowest position.
• The baby seat must not be caught in the car door or in
fold-down seats; no heavy objects may be placed on the
baby seat.
• Never hold your baby on your lap when travelling in the car.
The sheer force released in an accident will prevent you from
holding on to your baby.
• Never put the seat belt around yourself and the baby.
• No modifications may be made to the baby seat and the
straps.
• Make sure that the seat belt in the car is not damaged and is
fully functional.
• All the straps designed to restrain the baby in the seat must
Mallow 2 ABC.2024.2
EN
29

Publicidad

loading