Haier HVD042E-3S Manual Del Usuario página 8

lnitiaM Setup
Once you have plugged the unit into an electrical outlet, let the unit run for at least
30 minutes to acclimate itself before making any adjustments. During this time the
Red Wine light will stay on. Temperature inside the cooler, if not adjusted, will be at
55°_60°E
T÷_perature Adjustments:
See fig. # 1
The wine cooler is preset from the factory to automatically
accommodate temperature requirements for red or white wines. If you
store mostly white wines, press the "White Wine" button and the wine
cooler will maintain an average temperature between 45 ° to 50 ° E
Pushing the "Red Wine" button will yield an average temperature
between 55 ° to 60 ° E
The wine cooler can be set to any temperature you desire to
accommodate your wine storage requirements. To set the temperature,
press both the "White Wine" and "Red Wine" buttons simultaneously
and hold for approximately 3 seconds. Now you are in temperature set
mode. Decrease the temperature by pushing the "White Wine" button
and increase the temperature by pressing the "Red Wine" button,
Pressing the appropriate button 3 times will adjust the temperature 3
degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, and
so on, Once you have selected the temperature you desire, push the
"On/Off" button, Now the wine cooler is programmed and the LED
readout will return to current internal temperature reading,
fig. # 1
0
I
UWN
+:
I
tip
°@