Publicidad
Idiomas disponibles
Idiomas disponibles
Opening/closing the housing
Before closing the housing, place the power cable in the recess in the housing to prevent it from
being crushed.
Opening the housing
Cleaning/replacing the impeller unit
• Remove the pump cover or pump housing from the motor housing by turning it counter-
clockwise (bayonet catch).
• After removing the impeller unit, clean all parts under running tap water.
• Replace a worn or damaged impeller unit.
• Assemble in the reverse order.
Storage/winter protection
The unit is not frost-proof and has to be removed and put into storage if minus temperatures
are expected.
How to correctly store the unit:
• Thoroughly clean the unit.
• Check the unit for damage and replace damaged components.
• Store the pump submerged and in a frost-free environment.
Closing the housing
ARS0041
EN
ARS0042
ARS0043
15
Publicidad
