Publicidad
S
+,
en).
¿Ha
A,
i. ide
—
Pete
Features
+ Dual alarm PLL (phase locked loop) synthesized
clock radio
+ Display with adjustable brightness
Even if the power supply ls interrupted. the time
setting and the memory will be backed up for 1
hour without battery.
Precautions
+ Operate the unit on the power sburces specified
in "Specifications".
+ The nameplate indicating operating voltage, etc.
is located at the bottom of the unit (North and
South American model) or at the bottom of the
AC power adaptor (other models).
REDE
power cord (mains see puit
it out by the plug, not the
Bala A
not diete bons NS AC pone?
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned off.
+ Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that block the ventilation holes.
+ Should anything fall into the unit, unplug the unit
and have it checked by
personne!
before operating
it further.
+ To clean the casing, use a soft cloth dampened
with a mild detergent solution.
Please note that accordingly
only Sound and
TV-Radio Receivers meant for the entire
Population are allowed to be received via this set.
it is prohibited to receive all other transmission
such as police radio or mobile radio.
If you have any questions
or problems
concerning your unit, please consult your
nearest Sony dealer.
Setting the Clock
1. Plug in the unit.
The display will flash "AM 12:00" or "0:00".
2. While holding down ENTER/CLOCK,
press either + or — of TUNING/TIME SET
till the correct time appears in the display.
When you release ENTER/CLOCK, the
clock begins to operate and ":" flashes.
+ The clock system varies depending on the
model
you own.
12-hour system: "AM 12:00"
= midnight
24-hour system: "0:00"
= midnight
+ To set the current time rapidly, keep pressing
ENTER/CLOCK
and the + or — button together
to advance or return to a time that is within a tew
minutes
of the current time. Then press
the + or
= button to set the time to the current time.
Changing the Brightness of the Display
Window
To change the brightness of the display window,
slide BRIGHT (brightness).
T a ya own.
tou ystem. AM 12:00 = Midnight
2h-houmystem: "0:00" = midnight
Preset Tuning
Presetting
the Station
ce
apart 1o 5 eee FM/AM(MWY
LW with numbered buttons 1
Example:
To set AM 1260 kHz in preset number 2.
1. Tune in to AM 1260 kHz (See "Manual
Tuning").
2. Press ENTER/CLOCK.
"P* flashes for about 10 seconds.
3. Press the "2" button while "P" is flashing.
The beep sounds twice and the station
is preset. Though the indication changes
to the current time after 10 seconds, the
preset number remains.
260.) CES
+ To change the preset station, set a new station's
frequency in the number whose station you want
to change. The previous frequency is canceled.
+ Note that the preset 1 station is used for the
wake up station of the radio alarm.
Tuning in a Preset Station
1. Press RADIO ON/SLEEP to turn on the
radio.
2. Press the preset number button of the
station.
The band, frequency and preset number
appear in the display window. After 10
seconds, the indication changes to the
current time. The preset number
remains.
« To turn off the radio, press RADIO OFF/ALARM
+ To check the station you are listening to, press
the preset number button. The band and
frequency
appear for 10 seconds.
Setting the Alarm
You can set the radio and buzzer alarms. The
wake up station is that preset in number 1.
To set the radio alarm, first preset a desired
station for wake up to the preset number 1 (see
"Preset Tuning"), and adjust
the volume.
1. Turn off the radio.
2. While holding down A RADIO or B
BUZZER, press either + or — of
TUNING/TIME SET till the desired time
appears in the display.
The A RADIO or B BUZZER indicator
flashes while these buttons are being
Wake ups 5 tation
oni i$ that. présel in amb
To set the radio alarm, first preset a desid
station for wake up to the preset numbead (sea
2
Soo ape carteira
AAA
—
+ ystem: "AM 1200" =
2R-houfystom: 0:00" = midni
Publicidad
