Publicidad
4
CHANGING TABLE ASSEMBLY - FRAME ASSEMBLY
4a. Align the assembled side panels, shelves, Top Rear Rail (5), and Top
Front Rail (6) as shown in the illustration.
4b. Position the Wooden Dowels (F) between the assembled
shelves and the side panels. Place the Crescent Washers (E)
in the top rear rail and top front rail slots.
4c. Position and insert the Barrel Nuts (G) in the bottom
insertions of the shelf rails.
4d. Position and insert the Bolts (D) in the insertions
of the top rear rail, Bolts (C) in the insertions of
the top front rail, and Bolts (A) in the
insertions of the shelf rails.
4e. Tighten the bolts (A) into the barrel
nuts and the bolts (C) and (D) to
securely fix the frame of the
changing table.
F
Wooden Dowel (x8)
Cheville en bois (×8)
Clavija de madera (×8)
A
Bolt M6 X 75 MM (x8)
Boulon M6 X 75 MM (x8)
Perno M6 X 75 MM (x8)
20
6
(D)
(E)
5
(A)
(C)
(C)
(A)
E
Crescent Washer (x6)
Rondelle en forme de croissant (x6)
Arandela de media luna (x6)
D
Bolt M6 X 40 MM (x2)
Boulon M6 X 40 MM (x2)
Perno M6 X 40 MM (x2)
(E)
(C)
(A)
C
Bolt M6 X 45 MM (x4)
Boulon M6 X 45 MM (x4)
Perno M6 X 45 MM (x4)
6
(E)
(D)
(A)
(F)
(G)
(F)
(F)
(F)
(A)
G
Barrel Nut (x8)
Écrou de baril (x8)
Tuerca de barril (x8)
www.dreamonme.com/help
(A)
(G)
(A)
(G)
(G)
Publicidad
