Product Information; How It Works; Designs/Guidance Concept; Designs - RK Rose+Krieger E 30 Instrucciones De Montaje

6. Product information

6.1 How it works

Linear units are used for linear processes and positioning of workpieces, units, measuring equip-
ment and similar configurations.
A tapped spindle borne in a guidance section with an assigned guide nut transfers the positioning
movement, protected against rotation, to a guide slide at the operator's discretion.

6.2 Designs/Guidance concept

This linear unit is available in the designs and guidance versions given here.
•
After receiving this linear unit, check the device for possible damage and missing components.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.
The linear unit is delivered ready for operation, but without a controller and without accessories.

6.2.1 Designs

RK Pipe system linear unit RK Light Unit
Design with spindle
(Trapezoidal threaded spindle, material: aluminium)
Spindle versions:
•
Right-hand thread
•
Left-hand thread
•
Right/left hand thread

6.2.2 Guidance concept

Anti-rotation guide for a guidance slide on a guidance pipe.
Guidance pipe: Precision pipe to DIN EN 10305, stainless steel section, material 1.4301,
peak-to-valley height R
Spindle bearing: sealed deep groove ball bearings, slide bearings to order (Teflon coated)
After receiving this linear unit, check the device for possible damage and missing components.
If you find any faults, inform RK Rose+Krieger GmbH of these immediately. The linear unit is de-
livered ready for operation, but without a control system and without accessories.
30
= 0.4 µm
a