Torques; Installation With Fixings - RK Rose+Krieger E 30 Instrucciones De Montaje

7. Working life

7.2.2 Torques

Torque guideline values for metric shaft screws to DIN 4762 at 90% use of the 0.2% breaking
strain, for a coefficient of friction of 0.14.
Dimension
M4
M5
M6
M8
M10
Pay attention to the information in the installation instructions for the accessories. This contains
information for installing your application.

7.2.3 Installation with fixings

In all installation work, you must adhere to the specified torques for the screws used. Note the
tempering for the screws and separate information for accessories supplied. Only compliant con-
ditions will guarantee the safety and long working life of the linear shaft. Take the values from the
table in these instructions.
Depending on the installation location and application, the linear unit can be fixed with various
clamps.
Guidance pipe
1 Fixing with clamp for horizontal/vertical installation site
Guide slides for fixing workpieces, units, measuring
2
equipment, etc.
3 Fixing with clamp for securing pipes
4 Pin for handwheel
34
Rigidity 8.8
Torque M (Nm)
A
3.0
5.9
10
25
49
1
Rigidity 10.9
Torque M (Nm)
A
4.4
8.7
15
35
72
2
Rigidity 12.9
Torque M (Nm)
A
5.1
10
15
43
84
3
4