Descargar Imprimir esta página

KitchenAid KCM223 Instrucciones página 14

Ocultar thumbs Ver también para KCM223:

Publicidad

Idiomas disponibles

Idiomas disponibles

3,
4,
5,
For glass carafe models, press the
MODE button 6 times to enter the Clean
mode.
NOTE: For thermal carafe models, press
the MODE button 5 times to enter the
Clean mode.
The "Clean" indicator will flash until this
programming
cycle is complete.
Press the PROGRAM/SET button. The
"Clean" and "ON" or "OFF" indicators
will flash. Press the "+" (plus) or "-"
(minus) button to select "ON."
Press and hold the PROGRAM/SET
button to program the Clean setting. A
short beep will sound, indicating
programming
is complete.
6,
7,
8,
g,
NOTE: If you do not hold the
PROGRAM/SET button until a short
beep is heard, the settings will be
maintained and the coffee maker will
exit to the default mode.
Press the BREW button to start the
cleaning cycle. Once the cleaning cycle
is complete, the "Clean" indicator will
turn off.
Rinse the coffee maker by running it
through 2 brewing cycles using a full
water tank of fresh, cool water each
time.
Wash the brew basket in hot, soapy
water and rinse with hot water. The brew
basket can also be washed in the upper
rack of the dishwasher.
Reinstall or replace the water filter.
Replace the filter every 3 months under
normal use. Replace it more often under
heavy use or hard water conditions.
TROUBLESHOOTING
If the brew timer display is not
illuminated:
Check to see whether the coffee maker
is plugged into a grounded 3-prong
outlet. If it is, check the fuse or circuit
breaker on the electrical circuit the
coffee maker is connected to and make
sure the circuit is closed.
If only a portion of the water added to
the coffee maker actually brews:
The coffee maker requires immediate
descaling. Please refer to "Descaling the
Coffee Maker" in the "Coffee Maker
Care" section.
If "Err4" appears on the brew button
timer display:
A button may be jammed. Unplug the
coffee maker and press each button
several times.
Electrical Shock Hazard
Plug into a grounded
3 prong
outlet.
Do not remove ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow
these instructions
can result in death, fire, or
electrical
shock.
Plug the coffee maker into a grounded
3-prong outlet.
If "Err4" appears again on the display,
repeat this procedure.
14

Publicidad

loading

Este manual también es adecuado para:

Kcm222