Descargar Imprimir esta página

Beurer MG79 Instrucciones De Uso página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
2. Connect the sup-
plied USB-C cable
to the Deep Tis-
sue Massager. The
connection for the
USB-C cable
derside of the handle.
3. Connect the USB-C cable to a USB-C
mains plug (not included in delivery).
Insert the USB-C mains plug into a
suitable socket. The battery level in-
dicator
shows the current battery
7
level.
Battery level indicator
flashes white
7
Battery level indicator
lights up white
7
4. As soon as the battery level indicator
lights up white, remove the USB-C
7
mains plug (not included in delivery)
from the socket. The battery is now fully
charged. The battery will last for approx.
3 hours of operation when fully charged.
As soon as the battery level indicator
starts to flash red, you must recharge the
Deep Tissue Massager; otherwise it will
automatically switch off.
6.2 Selecting/changing the
attachment
Select the appropriate attachment before
starting the massage. To change an attach-
ment, proceed as follows:
1. Pull the existing at-
tachment horizon-
tally off the Deep
Tissue Massager.
2. Slide your desired attachment firmly into
the Deep Tissue Massager until you feel
it click securely into place.
is located on the un-
6
battery
=
charging
battery
=
is fully
charged
6.3 Switching on the device/
selecting the intensity level
The
er comes with an automatic
switch-off function. This means
that the Deep Tissue Massag-
er automatically switches off
after a period of use of approx.
10 minutes.
1. Press and hold the ON/OFF button
for 3 seconds. The battery level indi-
5
cator
7
now in standby mode.
2. Briefly press the ON/OFF button
to switch on the device. The left LED of
the intensity indicator
up. The massage starts at intensity lev-
el 1.
3. To switch between the intensity levels,
briefly press the ON/OFF button
The intensity indicator
rent intensity level.
Intensity level 1 (1700 rpm) →
Intensity level 2 (2450 rpm) →
7
Intensity level 3 (3200 rpm) →
Standby.
4. You can switch off the device at any
time during use by pressing and hold-
ing the ON/OFF button
onds). If you press the ON/OFF button
again at the third intensity level,
5
the device switches off. The device is in
standby mode.
If the device stops during use,
this may be due to excessive
pressure. Make sure that you do
not exert too much pressure on
the Deep Tissue Massager when
using it.
20
Deep
Tissue
starts to light up. The device is
starts to light
4
shows the cur-
4
Massag-
5
.
5
(3 sec-
5

Publicidad

loading