Descargar Imprimir esta página

cecotec CONGA GYRO HOME Manual De Instrucciones página 55

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
Warnings
Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
-
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 2
If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed to
-
prevent damage to the robot vacuum cleaner and ensure safe operation. Fig. 3
Direct exposure to sunlight or heavy light contrasts may affect the correct operation of
-
the sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a
new location for it to start running again.
3. INSTALLATION
1. Place the self-emptying base against a wall and leave a minimum free space of 1.5
metres to the front and 0.5 metres to each side. Fig. 4.
2. Plug the self-emptying base to a power socket. Wind and store the remaining cord in the
bottom part of the self-emptying base to avoid accidents.
3. Install both side brushes in their corresponding slots, located on the bottom part of the
robot vacuum cleaner. Press until they click well into place. Fig. 5
4. Connect the robot vacuum cleaner to the self-emptying base and make sure the charging
terminals on the robot match those of the base. Once the robot vacuum cleaner is
properly placed, it will beep once and the light indicator will come on. If the light is
flashing, it means the battery is not completely charged. To ensure the maximum
cleaning time, wait until the light turns steady, as this will indicate the battery is fully
charged and the robot vacuum cleaner is ready to clean. Fig. 6.
About the self-emptying base
The self-emptying base includes a loading and emptying function and a new dirt-
-
disposal bag. After cleaning, the robot will automatically return to the self-emptying
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
-
If the robot vacuum cleaner is charging on the self-emptying base, you can force the
robot to self-empty. Press the Back Home button for the self-emptying base to empty the
dirt tank.
ENGLISH
55
Conga Gyro Home

Publicidad

loading

Este manual también es adecuado para:

08608