cecotec CONGA GYRO HOME Manual De Instrucciones página 61

Maintenance
Cleaning of the infrared lens and the charge indicator. Fig. 12.
-
Use a clean, dry, soft cloth to wipe dust from the infrared lens and charge indicator. It is
-
recommended to clean them once a month.
Cleaning the fan support Fig. 13.
Check the fan filter holder for lint and dirt remains. If so, remove them with a clean, dry cloth.
It is recommended to clean it once a month.
6. TROUBLESHOOTING
Beeps while the indicator light is red:
Beeps Error
1 Driving-wheel
fault.
2 Side brush error.
3 Fan error.
4 Main-brush fault.
Other possible scenarios:
Problem
The robot vacuum cleaner
does not activate
The robot vacuum cleaner
suddenly stops working
The programming function
does not work
Solution
Check if the drive wheel is blocked.
Check if the side brushes are blocked and clean them.
Clean the dust or objects that may be blocking the air inlet
channel.
Check if the main brush is blocked or tangled and clean it.
Solution
Make sure the battery is fully charged.
If the problem persists, reset the robot vacuum cleaner by
pressing the RESET button.
Check if the robot vacuum cleaner is trapped or stuck with
any obstacle.
Check the battery level.
If the problem persists, turn the robot off and then on again.
If the issue persists, press the RESET button.
Check if the robot vacuum cleaner battery is too low to turn
on.
ENGLISH
61
Conga Gyro Home