Sailwin SW-F700 Manual Del Usuario página 4

SW-F700
6：About machine maintenance
①After about 40 hours of continuous use, please use 80% distilled water and 20% white vinegar to remove the
impurities accumulated in the heat pipe.
②Clean the pipeline and filter head in the tank;
③Pour out the mist liquid and replace the cleaning liquid (80% distilled water and 20% white vinegar).
④ Turn on the power, continue heating, and use the cleaning fluid instead of the smoke fluid to work until the
cleaning fluid is used up.
⑤If the smoke becomes smaller, the pump makes noise, or cannot spray. turn off the power i mmediately, and
check whether there is smoke fluid in the oil bottle. Whether the fuse is intact, whether the controller interface
and power plug are plugged in. If all of these are normal, please connect the power and plug to try again. If the
problem still cannot be solved, please contact us and we will help you solve it as soon as possible.
WWW.SAILWINLIGHT.COM
..........................................................................................■
INFO@SAILWINLIGHT.COM
2