flow-med CalmCharge Manual De Instrucciones página 4

EN INSTRUCTION FOR USE
Starting up
1. Plug the USB cable into a USB power supply and the USB-C plug into the USB-C socket of your CalmCharge.
2. Then plug the USB power supply unit into a mains socket.
Depending on the power source (USB power supply), the device is charged and ready for operation in approx. 4 to 8 hours.
i 4 Blue LEDs show the charging status (1 LED 25%, 2 LED 50%, 3 LED 75%, 4 LED 100%)
Operation POWER BANK
Briefly press the ON/OFF button to switch on the charging function.
i 4 Blue LEDs show the power status (1 LED 25%, 2 LED 50%, 3 LED 75%, 4 LED 100%)
Connect mobile devices such as smartphones, smartwatches, EarPods, hearing aids, hearing aid charging stations, humidifiers, and
many more to the sockets 2x USB-A or USB-C with the enclosed USB cable.
You can charge or operate all DC 5V USB devices up to 22.5 watts with the POWER BANK.
The Power Bank will automatically turn off when the battery is empty (the 4 blue LEDs switch off) or press the ON/OFF button twice
briefly.
Operation HAND WARMER
Hold the ON/OFF button for 3 seconds to turn on the HAND WARMER function. i Orange LED light up
In about one minute, the two aluminum heating surfaces heat up to approx. 45°C (113°F). You can use the pleasant warmth between
your hands or worn on your body.
The hand warmer will turn off automatically after 30 minutes or press and hold the ON/OFF button for 3 seconds.
2