Whalen Breenly SPUS-BRMF-WH Instrucciones De Montaje página 6

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (3) into the designated small holes on the Drawer Front Panels (H and I)
and Lower Drawer Side Panels (L and M) using a Phillips screwdriver. DO NOT overtighten the Cam Bolts.
NOTE: Screw-in cam bolts must be screwed down flush.
3. Glue the Wood Dowels (4) into the inner holes on the Lower Drawer Side Panels (L and M), one Drawer
Back Panel (N) and the Drawer Bottom Support (O) at both ends.
NOTE: It is very important to use a small amount of glue on both ends of dowels and wipe away the
excess glue immediately with a damp cloth.
Drawer Assembling
6