Publicidad
Idiomas disponibles
Idiomas disponibles
The caster will face the floor
when the unit is turned upright.
8. Align and attach the Drawer Bottom Support (O) to the Lower Drawer Left Side Panel (L) by engaging
one Small Cam Lock (1). (Refer to page 3 on Cam Lock system operation supplement).
9. Orient and attach the other Drawer Back Panel (N) to the Lower Drawer Left Side Panel (L) with two 38 mm
Screws (7).
10. Repeat the same procedure to attach the Drawer Right Side Panel (M) at the opposite end.
11. Slide the Drawer Bottom Panels (P) into the grooves between the Drawer Side Panels until fully inserted
into the Drawer Back Panels (N).
Drawer Assembling
9
Publicidad
