Publicidad
Idiomas disponibles
Idiomas disponibles
42
Installation Guide
AN WARNING
This installation information is designed for experienced installers and is not in-
tended for non-technical individuals. lt does not contain warnings or cautions of po-
tential dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than qualified in-
staller could cause damage to the electrical system and could result in serious per-
sonal injury or death.
O Installation Hardware
em
is E
Mounting collar
Tapping screw
(5 mm@x 16 mm)
° Mounting bolt (5 mmg) rag
diass
AN
Removable face plate
case
sh
Lock cancel plate
EE
O Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps:
(Please
refer to the
"WARNING"
statement
above.)
e Identify and label the car wires.
e Connect the car wires to the wires of the power
connector.
CQ-DF602U
e Install the unit in the dashboard.
e Check the operation of the unit.
If you encounter problems, please consult your
nearest professional installer.
Caution:
e This unit operates with a 12 V DC negative
ground auto battery system only. Do not at-
tempt to use it in any other system. Doing so
could cause serious damage.
Before you begin instalfation, look for the items
which are packed with your unit.
e Warranty Card...Fill this out promptly.
e Panasonic Servicenter List for Service Directory
...Keep for future reference in case the product
needs servicing.
e Installation Hardware...Needed for in-dash in-
stallation.
O Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and
the following:
12 V DC
Test bulb
Electrical
Side-cut
tape
pliers
S
E
A Dashboard Specifications
Thickness
Min. e" (4.75 mm)
-Max. 2" (5.56 mm)
CY. 24 (53 mm)
Le
z
So (182 mm)
|
Publicidad
