Publicidad
Idiomas disponibles
Idiomas disponibles
O Installation Procedures
First complete the electrical connections, and then
insert mounting collar @ into the dashboard, and
check them for correctness. (= page 48)
1
bend the mounting tabs out with a screwdriver.
The included mounting collar (1) is designed special-
:
|
ly for this unit. Do not use it to attach any other
Fastening the mounting collar
model.
The tabs to be bent vary depending on
the car..Bend them with a screwdriver to
fasten the mounting collar @) securely in
the dashboard.
Dashboard
LY),
(6) Power connector - -
BO}
SF
{
A (2
-Ñ
>
CC
E
GS
-
\
4
e To securely install the unit, fully bend
a number of the tabs so that there is
ad
DI
no rattling.
134
¡A tabs
eBe sure to fasten the unit securely
© Mounting bolt (5 mmg)
when joining it with the mounting col-
lar @.
Secure the rear of the unit.
After fixing mounting bolt © and power connector
©, fix the rear of the unit to the car body by either
method (a) or (b) shown below.
2
insert trim plate (6).
©
After
installation,
reconnect
4
the negative © battery termi-
nal.
(a) Using the rear support strap ©)
Fire wall of car
@ Tapping screw
(5 mmøġ x16 mm)
3 mmo
\
@) Hex. nut
( 5
mm)
(3) Rear support
strap
(5) Mounting bolt
(5 mmg)
®© Mounting collar
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option)
(provided on the car)
(5) Mounting bolt
(5 mmg)
© Mounting collar
|
Ca-DF602U
45
Publicidad
