Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Technical characteristics
Type of thread: ..............................BSPT (Right, Left) NPT .........................BSPT (Right, Left) NPT
Thread taper: ................................1/16 ...................................................1/16
Threading speed: ..........................25 to 15 /min. ....................................25 to 15 /min.
Fast reverse speed: ........................58 /min. ..............................................58 /min.
Electric current: .............................230 V (110 V opcional) 50/60 Hz ........230 V (110 V opcional) 50/60 Hz
Absorbed power: ..........................1.010 W (900 W) ................................1.010 W (900 W)
ON switch: ....................................non-blocking ......................................non-blocking
Machine weight: ...........................6 Kgs ..................................................6 Kgs
Machine size: ................................580 x 95 x 140 mm ............................580 x 95 x 140 mm
Tube fastener weight: ...................1,6 Kgs ...............................................1,6 Kgs
Weight complete set: ....................17 Kgs ................................................16,4 Kgs
Size of Box: ...................................600 x 390 x 140 mm ..........................630 x 250 x 130 mm
Lw ................................................100 dBA .............................................100 dBA
Lp .................................................87 dBA ...............................................87 dBA
Vibratio level .................................<2,5 m/s
R (DIN 2999, BSPT), NPT/API, G (DIN ISO 228, DIN 259, BSPP) NPSM, Pg, M, BSW, UNC
2.
Machine components
1
Motor
2
Gear box
3
Head housing
4
Tube fastener adjustment
5
Tube fastener (clamp)
6
Bolt
7
Reverse speed lever
8
ON switch
9
Brush housing
10
Machine identification plate
11
Adapter monoblok 1/4"-1.1/4"
12
Adapter euroblok 1/4"-1.1/4"
3.
General safety instructions
Attention! When using electrical tools, please observe the following basic safety rules in order to
reduce the risk of electric shock, injury and fire. Read and follow all of these instructions before using
the threading machine.
Wear adequate safety clothing:
Do not wear loose clothing or jewellry. They could be caught by moving parts of the machine. For
outdoor work, rubber gloves and nonskid shoes must be worn.
Work in a correct position.
Avoid working in a tiring position. Stand up firmly and maintain a good balance at all times.
Keep your work area clear.
Do not allow other people to touch the machine or cable. Keep children out of reach.
Keep your work area tidy.
An untidy and dirty work area can lead to accidents. Do not leave electrical tools out in the rain. They
should not be used in a humid or wet environment nor near inflammable liquids or gases.
Do not overwork the machine.
Use the machine only for those jobs for which it has been designed, do not force it. Stop the machine
if it is not working correctly.
Protect the power cable.
Before starting up the machine, check that the electric cable and switch are in optimum condition. Do
1/4" - 2"
............................................<2,5 m/s
2
ENGLISH
1/4" - 1.1/4"
2
9
Publicidad
Tabla de contenido
