Safety Instructions - Armada Technologies Pro40 Manual Del Usuario

Safety Instructions

The instrument is designed according to the requirements of the
international electrical safety standard IEC61010-1 for the safety
requirements of electronic testing instruments. The design and
manufacture of instruments strictly comply with the requirements
of IEC61010-1 CAT.III 600V over voltage safety standards and
pollution level 2.
Safety Operation Specifications
Warning
In order to avoid possible electric shock or peronal injury
and other safety accidents, please abide by the following
specifications:
⚫ Please read this manual carefully before using the
instrument and pay special attention to safety warning
information.
⚫
Strictly observe the operation of this manual and use this
instrument. Otherwise, the protection function of the
instrument may be damaged or weakened.
⚫
Please be careful if the measurement exceeds 30V AC
true
RMS, 42V AC peak or 60V DC. There may be danger of
electric shock at this kind of voltage.
2