Quick operation guide
O R I G I N A L
4. USER INSTRUCTIONS.
4.1 - Place the lift on a fi rm, fl at surface
in the area it is to be used with the help of
the transport wheels (T).
4.2 - Remove the legs (P) from their trans-
port compartment (S) and fully insert them
into their working positions (V) checking
that they are fi xed by the pins (R).
4.3 - Check that the lift is in vertical posi-
tion using the spirit level (L) at the base of
the tower, adjust the stabilizer (Q), turning
the handle (H) if necesary.
4.4 - Release the forks (F) and place them
in its working position ready to take the
load on them. Insert the pins to block the
forks.
4.5 - DO NOT OVERLOAD THE LIFT.
TL-054 MAXIMUM LOAD IS 220 kg
TL-056 MAXIMUM LOAD IS 200 kg
The lift should NEVER be overloaded.
Safety at work is the most important is-
sue. Place the load onto the lift using an
PRO LIFTS S.L.
All manuals and user guides at all-guides.com
3.17 - Only original replacement parts should be used.
adequate VMB support according to the
need, use so that the weight of the load
will only be elevated in a vertical direction.
The minimum load is 25 Kg.
4.6 - How to place the load: Always load
as close to the tower as possible.
The maximum load diminishes according
to the distance from the body of the tower
as illustrated in the diagram 4.6.1, which
shows the load on the gravity centre with
distances to the lifting carriage at a maxi-
mum lifting.
CAUTION
When two towers are used to elevate a
truss bridge, or many towers to elevate a
structure of any type, it is almost impos-
sible that two or more people co-ordinate
the winches elevating or lowering the
loads, at exactly the same pace. At a cer-
tain point each tower will be extended to
different height. For this reason it is ne-
cessary that the structure does not stretch
and allows for these differences.
With a rigid fi xation and if the level diffe-
rence is signifi cant, the force generated
Depósito legal y copyright 2014. Todos los derechos reservados.
ENGLISH
9