Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS OF THE IRON.
FILLING WATER.
- Set the temperature regulator to minimum.
- If the iron is plugged in, unplug it.
- Pour the water into the tank with your glass. Never beyond the "Maximum" signal.
Use only normal distilled water.
- ATTENTION:
TEMPERATURE ADJUSTMENT.
- Place the iron upright and unplugged.
- Depending on the type of garment to be ironed, set the desired temperature.
- Plug the iron.
- Once the indicator light goes out, you can begin ironing.
- The indicator will go on and off as need to recover temperature.
- If with the hot iron and the indicator off you select a lower temperature,
you should wait until the indicator lights up and then goes off again to start ironing.
STEAM IRONED / SPRAY.
- Make sure there is enough water in the tank.
- Select the desired temperature.
- Set the desired amount of steam with the steam selector.
- If you want a strong blow of steam, press the steam button.
- To spray water on clothing, press the spray button.
- For optimum steam, iron when the pilot is off. With the pilot on,
the temperature is low and the iron can release water instead of steam.
NOTE.
- If you select too low a temperature, the iron can release water instead of steam.
Steam ironing is only for ironing at high temperatures.
- With strong strokes of steam, the resistance tends to cool faster,
so wait warm-up time between strokes of steam.
1. Water sprayer.
2. Water tank cover.
3. Steam quantity and cleaning selector.
4. Steam blow button.
5. Spray button.
6. Water tank.
7. Hot plate for ironing.
8. Protector passes cable.
9. Thermostat.
Publicidad
