Barrette BOL-WEB Instrucciones De Instalación página 5

5.
Using 2x M6 Bolts (F3), 2x M6 Acorn Nuts (F2),
install hardware as shown (Fig. 9).
6.
If there is no picket inside of the bracket area,
place one U-Channel Block (F6) around the rst
bolt. This will prevent the bracket from deforming
when tightening the bolts down (Fig. 10).
7.
Tighten bolts down using a 10mm socket drive or
box wrench and a crescent wrench.
Fig. 9
(2) F3 (2) F3
(2) F5 (2) F5 (2) F5 (2) F5 (2) F5
(2) F2 (2) F2
Fig. 10
F6 F6
5