Barrette BOL-WEB Instrucciones De Instalación página 6

8.
Predrill holes in the below locations using 1/8" drill bit and using 3x #10x1" Screws,
install one (F4) per rail
(Figs. 11&12).
NOTE:
Kit comes with extra screws that can be used in this kit or when installing panels
to posts.
9.
Remove clamps from gate.
10.
Repeat steps 2-9 to install the second gate
upright.
6
⁄ ⁄ " from the back of the gate upright and aligned with the rail ⁄ ⁄
5 5 5
8 8
Fig. 11
Install F4 Install F4 Install F4
Here Here Here Here
Install F4 Install F4
Here Here
A A
Panel Panel
F4 F4
Finished Gate Section Finished Gate Section
Fig. 12
5/8" 5/8"