Publicidad
Idiomas disponibles
Idiomas disponibles
627Wb Mission Writing Desk
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Mallet or Padded Hammer, Wood Glue
We recommend that you apply finish before you assemble this unit.
Fig. 1
1. Place the Top Assembly (Ab) upside-down on a clean, protected surface. Gently tap the Side
Assemblies (Cb) into place with a mallet or padded hammer. DO NOT GLUE THE SLATS.
See Figure 1.
Fig. 2
Gb
2. Place the Right/Left Back Legs (Gb) to either side of Back Assembly (Db) as shown in Figure 2.
NOTE that the corner insert holes face in and the dowel holes face the Back Assembly and
towards you. Place a thin layer of glue in the dowel holes on the Right/Left Back Legs and attach
the Back Assembly (Db). Quickly wipe away any excess glue with a damp rag. See Figure 2.
Assembly Instructions
IMPORTANT:
Before doing so, read the enclosed finishing hints.
Cb
Ab
Db
Cb
Gb
Page 3 – 627Wb – 10/13
Publicidad
