Publicidad
Idiomas disponibles
Idiomas disponibles
Dowel hole
Cb
Eb
J
I
Fig. 3a
Fig. 3
3. Spread a thin layer of glue in the dowel holes on the Right Front Leg (Eb), Left Front Leg (Fb) and
Back Leg Assemblies. Place the legs at the corners of the apron so that the drilled corners of the
legs face the corner braces. Insert dowels into the holes on the legs and gently tap into place using
a mallet or padded hammer. See Figure 3. Wipe any excess glue with a damp rag. Insert a 3/8"x2-1/2"
Hex Bolt (I) with a Washer (J) through the corner block and into each leg and fasten securely.
See Figure 3a.
4. Using the predrilled holes as guides, secure the legs to the Side and Back assemblies with #8x1-1/4"
Pan Screws (H). See Figure 4.
5. Turn the desk upright and insert the Drawer (KK).
Page 4 – 627Wb – 10/13
Dowel hole
Fb
Cb
I
H
Fig. 4
J x 4
x 4
H
x 6
Publicidad
