Publicidad
PROBLEMS SOLVING
Gas valve closed.
Empty gas cylinder.
Pilot flame does
Blocked opening.
not ignite
Air in the ducts.
Loose connections.
Impurities in pilot tube.
Loose connections.
Pilot flame does
Faulty thermocouple.
not stay lit
Gas leak.
Low gas pressure.
Low pressure.
Blocked opening.
Knob not in ON position.
The burner
Faulty thermocouple.
does not ignite
Bent or incorrectly positioned
pilot flame
IDENTIFICATION TABLE
Open the gas passage.
Change the bottle.
Clean or open the opening.
Bleed the air.
Check connections.
Clean impurities.
Check the connections.
Replace the thermocouple.
Check the connections.
Check that there is gas in the cylinder.
Empty gas cylinder.
Replace, Clean and open opening.
Put the knob in the ON position.
Replace the thermocouple.
Place the pilot in the correct position
and try again.
Publicidad
