Publicidad
Idiomas disponibles
Idiomas disponibles
en
ENGLISH
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
d) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the tool in unexpected situations.
e) Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles. A careless
action can cause severe injury within a fraction of a
second.
3.4
Tool Use and Care
a) Do not force the power tool. Use the correct
tool for your application. The correct tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the tool if the switch does not turn
it on and off. Electrical devices that can no longer
be switched on or off are dangerous and must be
repaired immediately.
c) Disconnect the plug from the power source
and/or remove the battery pack from the power
tool before changing accessories, or storing
the tool. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle tools out of the reach of children.
Do not allow persons unfamiliar with the tool or
these instructions to operate the tool. Devices
are dangerous when used by inexperienced
personnel.
e) Maintain power tools and accessories with
care. Check that the moving parts are
functioning properly and do not jam, that there
is no breakage of parts or any other condition
that may affect the tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Use the power tool, accessories, tool bits etc.
in accordance with these instructions. taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
g) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow safe
handling and control of the tool in unexpected
situations.
3.5
Use and handling of the cordless tool
a) Only charge batteries with charging devices
recommended by the manufacturer. A charger
that is suitable for one type of battery pack may
create a risk of fire when used with another battery
pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
12
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery. Avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose the battery pack to fire or
excessive temperatures. Fire or temperatures
above 130 °C can cause an explosion.
g) Follow all instructions on charging and never
charge the battery or the cordless tool outside
the temperature range indicated in the
operating instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
3.6
Service
a) Have your tool serviced by a qualified repair
person using only genuine replacement parts.
This will ensure that the tool functions safely.
b) Never service damaged batteries. Any
servicing of batteries should only be carried out by
the manufacturer or authorised customer service
points.
3.7
Additional Safety Instructions
- These operating instructions are intended for
people with basic technical knowledge regarding
the operation of a machine like this or similar
electrical power tools. Inexperienced persons are
strongly advised to seek competent advise and
guidance from an experienced person before
operating this machine.
- The manufacturer assumes no liability for any
damage caused by neglect of these operating
instructions.
Information in these instructions is marked as
under:
Danger!
Risk of personal injury, property damage or
environmental damage.
4. Special Safety Instructions
The following residual risks basically exist for
compressed air tools and cannot be remedied
completely even with safety installations.
4.1
Danger of injury due to escaping
compressed air and parts, which are
carried along by compressed air!
- Never direct compressed air on people or
animals.
Publicidad
