7. Orient and insert the tenon of one Middle Stretcher (F) into the mortise of the two Footrests (E) as
shown.
8. Insert the assembled Footrests (E) into the mortise of the assembled Legs (B and C). Make sure that the
slant holes on the stretchers will face the floor when the unit is turned upright.
9. Repeat the same procedure to attach the remaining Legs (B and C) and Side Stretcher (D) to the
previous assembly at the opposite end.
Assembly Instructions
Slant holes face in the same direction
E
F
B
D
C
E
E
5
C
E
A
B