Coolbox COO-LCB2D-W01 Manual De Usuario página 4

EN
Please read this manual carefully before using this product. CoolBox
cannot be held responsible for any problems arising due to misuse
of the product.
1 .SPECIFICATIONS:
- Technology: Plannar CMOS sensor 640x480
- Code compatibility: 1D and 2D
- Interface: Wireless and Bluetooth 4.0
- Range: 10 metres in BT mode and 80 metres in Wireless mode
- Trigger modes: Manual / Autodetection
- Inventory mode: Yes, with 2MB of memory
- Scanning Distance: 20 ~ 500 mm
- Scan speed: 1/500 s
- Compatibility: WIndows, Mac OS, Android, Linux (drivers not re-
quired)
- Indicators: Light / Sound
- Supported codes: All standard 1D and 2D QR_CODE, PDF417,
DATA MATRIX, Micro QR, Aztec, MicroPDF417, Maxicode, Inverse
barcode and GS1 Codebar, including on screens
2. HOW TO USE THE SCANNER
To connect via the 2.4G bluetooth connector: Connect the bluetooth
connector to the USB PC and press the button on the scanner, it
should work directly (both devices have been previously paired).
If it has not been connected correctly, scan the QR in the "2.4G
mode" and then "Match enforced". The green light will blink during
pairing and the blue light will come on at the end of pairing.
To connect via the built-in bluetooth system on your PC: Enter the
bluetooth settings on your PC, scan the QR in the function section
"bluetooth HID mode" and then "Match", the blue and green lights
will flash and the scanner will go into pairing mode. Now you can
click on "add a new device" and you will see "Barcode Scanner HID".
3. FUNCTIONS
To access all function settings, see the pages at the end of all lan-
guages.