Emos E0107 Manual De Instrucciones página 4

Displaying the max/min values of the outer and inner temperature
Push the MAX/MIN button repeatedly to display the max and min measure temperature. Hold the
MAX/MIN button to erase the memory.
Backlighting of the display
Push the LIGHT button and the display will be backlit for 5 seconds.
Maintenance
• Do not put the product in locations prone to vibrations and shocks – it could damage the product.
• Do not place the thermometer in places with sudden temperature changes or direct sunlight,
extreme cold and moisture and conditions, which may lead to fast temperature changes. It would
lower the temperature measurement accuracy.
• Clean the LCD display and the appliance cover with soft wet cloth. Do not use solvents or
cleaning detergents.
• Do not submerge the product under water or other liquid.
• Remove any depleted batteries from the product immediately. Otherwise they might leak and
damage the product. Use only new batteries of the prescribed type.
• When the product is damaged or malfunctioning, do not repair it on your own. Have it repaired
in the shop, where you bought it.
This product is not to be used by persons (including children), whose physical, sensory or mental
abilities or lack of experience and knowledge does not ensure safe use of the appliance, unless they are
supervised or unless they have been instructed about the use of this appliance by a person in charge
of their safety. Supervision over children is required to prohibit them from playing with the appliance.
Hereby, EMOS spol. s r.o. declares that the radio equipment type E0107 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: http://www.emos.eu/download.
CZ | Bezdrátový teploměr
Specifikace
Hodiny řízené rádiovým signálem
Teplotní rozsah:
teploměr: -9 °C až +50 °C
venkovní čidlo: -50 °C až +70 °C
Teplotní rozlišení: 0,1 °C, přesnost (±1,5 °C)
Zobrazení jednotky teploty: °C/°F
Dosah čidla: 60 m ve volném prostoru
Přenosová frekvence: 433 MHz, 10 mW e.r.p. max.
Napájení teploměru: 2× 1,5 V AAA baterie
Napájení čidla: 2× 1,5 V AAA baterie, stupeň krytí IPX4
Popis hlavní jednotky
Přední displej:
1 – venkovní teplota
2 – vnitřní teplota
3 – zobrazení času
Popis funkcí tlačítek
LIGHT
MAX/MIN
Stisknutí
podsvícení
nastavení zobrazení max/min teploty
Zadní strana:
4 – otvor pro zavěšení na zeď
5 – bateriový prostor
6 – stojánek
4
Podržení