Publicidad
Idiomas disponibles
Idiomas disponibles
19. A loose fit between the AC outlet (receptacle) and plug may cause
overheating and a distortion of the plug. Contact a qualified electrician to
replace a loose or worn outlet.
20. Do not use the KenkoAir Purifier
where combustible gases or vapors are
™
present.
21. Do not operate near a kitchen vent.
22. Do not expose the KenkoAir Purifier
to rain, or use near water, in a
™
bathroom, laundry area or other damp location.
23. Do not allow foreign objects to enter the ventilation or exhaust opening, as
this may cause electric shock or damage to the product. Do not block air outlets
or intakes. Keep these openings clean as specified in the instructions.
24. Do not sit, stand or place heavy objects on the KenkoAir Purifier
.
™
OPERATING INFORMATION
Setup Instructions
Place the KenkoAir Purifier
in an appropriate area (see precautions) and
™
connect to a power source.
Operating Instructions
Activating the unit
When the KenkoAir Purifier
is first turned on, the air quality indicator will change
™
color several times to calibrate itself and stabilize after approximately 10-
45mins. The blue end of the scale denotes a low level of airborne contaminants.
Red signifies a higher concentration of pollutants. A sensor continually monitors
the indoor air and any alteration is reflected in the color of this indicator.
Fan speed
Press the fan speed button to choose the desired speed. In auto mode the fan
speed is controlled by the air quality sensor, and automatically adjusted as
appropriate.
Timer
Pressing the timer button will set the KenkoAir Purifier
to operate for three hours,
™
and pressing it again while the unit is operating in timer mode will cancel this
setting.
Filter life indicator
When the filter life indicator is flashing, the filters require immediate replacement.
After new filters are installed, activate the unit, then depress and hold the
indicator button for three seconds to reset this function.
-7-
Publicidad
