Publicidad
Idiomas disponibles
Idiomas disponibles
Operating
Instructions
Select dry mode for dry operation.
Dry: dry model is used to remove humidity from the room without additional cooling.
Once the set temperature is reached,
the compressor and circulation fan turns off.
Fan speed is pre-set and cannot be adjusted.
TEMPERATURE
CONTROL
The thermostat monitors room temperature
to maintain the desired temperature.
The thermostat can be set between 60°F~86°F(16°C~30°C).
The unit takes an average of 30 minutes to adjust the room temperature by I°F.
REMOTE
CONTROL
SENSOR
_ure
of electric power, the unit runs as previous setting operation,
Ak CAUTION
The Remote
Controller
will not function
properly
if strong
light strikes
the sensor
window
of the air conditioner
or if there are obstacles
between
the Remote
Controller
and the air
conditioner.
1. Push out the cover on the back of the remote control with your thumb
2. Pay attention to polarity and insert two new AAA 1.5V batteries.
3. Reattach the cover.
Do not use rechargeable batteries. Make sure that both batteries are new.
Do not mix alkaline, standard(Carbon-zinc) or rechargeable(NickeFcadmium)
batteries.
In order to prevent discharge, remove the batteries from the remote control if the
air conditioner is not going to be used for an extended period of time
Keep the remote control away from extremely hot or humid places.
To maintain optimal operation of the remote control, the remote sensor should
not be exposed to direct sunlight.
• The remote control can be mounted on a wall using the mountable holder.
18 Room Air Conditioner
Publicidad
